DeWalt XR Li-Ion DCD701, Original Instructions Manual

Page: 5 / 32

ENGLISH
5
and the accessories, keep the hands warm, organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Sub-Compact Drill/Driver
DCD701
D
E
WALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
E
WALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
E
WALT .
Markus Rompel
Vice-President Engineering, PTE-Europa
D
E
WALT , Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
06.12.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury .
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury .
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury .
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage .
Denotes risk of electric shock.
Denotes risk of fire.
Congratulations!
You have chosen a D
E
WALT tool. Years of experience, thorough
product development and innovation make D
E
WALT one of the
most reliable partners for professional power tool users.
Technical Data
DCD701
Voltage V
DC
12
Type 1
Battery type Li-Ion
Power output W 250
No-load speed
1st
gear
2nd gear
min
-1
min -1
0–425
0–1500
Max. Torque (hard/soft) Nm 57.5/25.5
Chuck capacity mm 10
Maximum drilling capacity
Wood
Metal mm
mm 20
10
Weight (without battery pack) kg 0.87
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L
PA
(emission sound pressure level) dB(A) 72
L
WA
(sound power level) dB(A) 83
K (uncertainty for the given sound level) dB(A) 3
Drilling into metal
Vibration emission value a
h,D
= m/s 2 2.5
Uncertainty K = m/s 2 1.5
Screwdriving
Vibration emission value a
h
= m/s 2 < 2.5
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
SUBCOMPACT DRILL/DRIVER
DCD701