21
EnGLIsh
Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an approved
extension cable suitable for the power input of your charger (see
Technical Data
). The
minimum conductor size is 1.5 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
SAVE THESE INSTRUCTIONS
Package Contents
The package contains:
1 Corded power supply
1 Instruction manual
• Check for damage to the tool, parts or accessories which may have occurred
during transport.
• Take the time to thoroughly read and understand this manual prior to operation.
Markings on Corded Power Supply
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (Fig. A)
The date code
8
, which also includes
the year of manufacture, is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A–D)
WARNING:
Never modify the power tool or any part of it. Damage or personal injury
could result.
1
AC connector
2
Release button
3
Cord clip
4
Dust cover (Fig. B)
5
Tool's corded power supply AC
connector receptacle (Fig. B)
6
Dust cover holder (Fig. C)
7
Tool's cord clip holder (Fig. D)
Summary of Contents for XR FLEXVOLT DCB500 Series
Page 1: ...DCB500 Final print size A6 105mmx148mm ...
Page 3: ...1 Fig A 1 2 8 3 Fig B 2 3 4 5 ...
Page 4: ...2 Fig C Fig D 7 3 6 ...
Page 103: ...101 ...
