25
ENGLISH
TECHNICAL DATA
DWV116
TYPE
AR
B2
B3
BR B2C
Voltage
V
220 220 120 127 220
Frequency
Hz
50
60
60
60
50
Power
W
1300
Motor
Single Stage
Tank Capacity
L (Gallons)
60 (16)
Hose diameter in (mm).
2-1/2” (63,5)
Hose length
ft (m)
7’ (2,1)
Weight
kg (lbs)
15,3 (33,7)
Troubleshooting
WARNING:
to reduce the risk of injury from
moving parts and/or electrical shock, turn
power switch off and disconnect grounded
plug from electrical outlet before performing
troubleshooting checks.
Minor problems often can be fixed without calling customer
service
TROUBLESHOOTING
PROBLEM
POSSIBLE SOLUTION
Motor does not run
Check power cord, plugs and outlet.
Ensure the on/off switch is in the ON position (I)
Suction capacity decreases
Remove blockages in the suction nozzle, suction tube, suction hose or filters
Replace the paper or fleece bag
Check for proper installation of the filters.
Clean or replace the filters.
Empty canister, refer to
Emptythe tank
under
Operating.
Vacuum stops running
Thermal overload has been tripped:
1. Turn the vacuum off and disconnect vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate outlet and turn on/off switch to the
ON position ( I) to test. If vacuum will not restart call 1-888-899-0146
Dust comes out while vacuuming
Check for proper installation of the filters.
Ensure filters are not damaged; replace if necessary.
Ensure filter seals are in place and are secure.
