14
EngLIsh
• Always use the side handle on the rotary hammer drill, even
when the dust extractor is attached.
• Only use if filter is in place.
• Do not use the attachment for drilling applications in wood,
steel or plastic.
• Do not use the attachment in core drilling applications.
• Do not use the attachment for chiselling applications.
• Use only power tools recommended by
D
e
WALT
with this
attachment. For more information about
D
e
WALT
power tools
compatible with this attachment, please contact your local
dealer, refer to the addresses at the back of the manual or visit
www.dewalt.com.
• Do not use the tool in damp or wet conditions.
• Do not allow to be used as a toy. Close attention is necessary
when used by or near children.
• Use only as described in this manual. Use only manufacturer's
recommended attachments.
• Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair and anything that
may reduce air flow.
• Keep hair, loose clothing, fingers and all parts of body away
from openings and moving parts.
• Do not use to pick up flammable or combustible liquids, such
as gasoline, or use in areas where they may be present.
• Do not use with damaged filter. Replace a damaged filter
immediately.
• Never carry the power tool by the dust extraction attachment.
Residual Risks
The following risks are inherent to the use of the dust
extraction system:
• Injuries caused by touching the rotating parts or hot parts of
the tool
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of squeezing fingers when changing the accessory.
• Health hazards caused by breathing dust developed when
working in concrete and/or masonry.
Package Contents
The package contains:
1 Dust extraction system
1 Small dust extraction head
1 Standard dust extraction head
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Dust Extraction System
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (Fig. F)
The date code
18
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Dust collection box
2
Dust collection box release
buttons
3
Filter cleaning mechanism
4
Depth adjustment button
5
Adjustment for drill bit
length button
6
Telescope
7
Dust extractor ring
8
Dust extractor ring release
button
9
Worklight
10
Dust extraction head
11
Dust brush
12
Dust extractor ring lock
button
Intended Use
Your dust extraction system DWH205DH has been designed for
the extraction of dust in professional hammerdrilling in masonry
or concrete, and with solid drill bits mounted to the power tool.
DO nOt
use for drilling plastic, wood or metal.
DO nOt
use
with hollow bits or core bits.
This dust extraction system will fit the
D
e
WALT
DCH263 18 V
cordless SDS PLUS hammer
DO nOt
use under wet conditions or in the presence of
flammable liquids or gases.
The dust extraction system is an attachment for use with
professional power tools.
DO nOt
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Worklight (Fig. A)
CAUTION: Do not stare into worklight.
Serious eye
injury could result.
There is a worklight
9
located on the top of the dust extractor.
The worklight is activated when the trigger switch is depressed,
and will automatically turn off 20 seconds after the trigger
switch is released. If the trigger switch remains depressed, the
worklight will remain on.
