English
2
D
e
WALT
tools are precision-built tools, designed for precise,
high volume nailing. These tools will deliver efficient,
dependable service when used correctly and with care.
As with any fine power tool, for best performance the
manufacturer’s instructions must be followed. Please study
this manual before operating the tool and understand
the safety warnings and cautions. The instructions on
installation, operation and maintenance should be read
carefully, and the manual kept for reference.
nOTE:
Additional safety measures may be required because
of your particular application of the tool. Contact your
D
e
WALT
representative or distributor with any questions
concerning the tool and its use.
D
e
WALT
, 701 E. Joppa Road, Towson, Maryland 21286,
U.S. & Canada Only, É.-U. et Canada seulement
D
e
WALT
tools have been engineered to provide excellent
customer satisfaction and are designed to achieve
maximum performance when used with precision
D
e
WALT
fasteners engineered to the same exacting standards.
D
e
WALT
cannot assume responsibility for product
performance if our tools are used with fasteners or
accessories not meeting the specific requirements
established for genuine
D
e
WALT
nails, staples
and accessories.
2-N-1™ FLOORING TOOL: DWFP12569
Tool specifications
Model
Length
Height
Width
Weight
DWFP12569
20.39” (518 mm)21.95” (558 mm) 3.15” (80 mm) 10.2 lbs (4.6 kg)
All dimentions in inches unless otherwise specified.
Fastener specifications
Model
Fastener
Crown
Width
Gauge
Fastener Range
DWFP12569 DWCS15xx
1/2”
(13mm)
15-1/2 Ga., 1/2”
Crown Staples
1-1/2” (38mm)
to 2” (50mm)
DWFP12569 DWFLN-xxx -
16 Ga. “L” shape
Cleat Nails
1-1/2” (38mm)
to 2” (50mm)
Tool Air Fitting:
This tool uses a 1/4” N.P.T. male plug. The inside diameter
should be .200” (5 mm) or larger. The fitting must be
capable of discharging tool air pressure when disconnected
from the air supply.
Operating Pressure:
70 to 100 p.s.i.g. (4.9 to 7.0 kg/cm²). Select the
operating pressure within this range for best fastener
performance. DO NOT EXCEED THIS RECOMMENDED
OPERATING PRESSURE.
Air Consumption:
The DWFP12569 requires 3.52 cubic feet per minute
(100 liters per minute) of free air to operate at the rate of
60 fasteners per minute, at 80 p.s.i. (5.6 kg/cm2). Take the
actual rate at which the tool will be run to determine the
amount of air required. For instance, if your fastener usage
averages 30 fasteners per minute, you need 50% of the
tool’s c.f.m. of free air which is required to operate the tool
at 60 fasteners per minute.
Limited Warranty
U.s. and Canada Only
D
e
WALT
warrants to the original retail purchaser that the
product purchased is free from defects in material and
workmanship, and agrees to repair or replace, at
D
e
WALT
’s
option, any defective
D
e
WALT
branded pneumatic stapler or
nailer for a period of seven (7) years from date of purchase
(one (1) year from the date of purchase for compressors
and tools used in production applications). Warranty is not
transferable. Proof of purchase date required. This warranty
covers only damage resulting from defects in material or
workmanship; it does not cover conditions or malfunctions
resulting from normal wear, neglect, abuse, accident or
repairs attempted or made by other than our national repair
center or authorized warranty service centers. Driver blades,
bumpers, o-rings, pistons and piston rings are considered
normally wearing parts. For optimal performance of your
D
e
WALT
tool always use genuine
D
e
WALT
fasteners and
replacement parts.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
D
e
WALT
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Some states and countries do not allow limitations on how
long an implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other
rights which vary from state to state and country to country.
To obtain warranty service in the U.S. return the
product, together with proof of purchase, to the U.S.
D
e
WALT
National or Regional Independent Authorized
Warranty Service Center. In the U.S. you may call us at
1-800-4-
D
e
WALT
(1-800-433-9258) or visit www.
D
e
WALT
.
com for the location most convenient for you. In Canada
please call us at 1-800-4-
D
e
WALT
(1-800-433-9258) or visit
www.
D
e
WALT
.com
