ENGLISH
7
Read the Instruction Handbook:
Before positioning, operating or adjusting the
compressor, read the instruction book carefully.
MARKINGS ON TOOL
The following pictograms are shown on the tool:
RISK OF ELECTRIC SHOCK:
CAUTION: before doing any work on the compressor, it
must be disconnected from the power supply.
RISK OF HIGH TEMPERATURES:
CAUTION: the compressor contains some parts which
might reach high TEMPERATURES.
RISK OF ACCIDENTAL START-UP:
Attention: the compressor could start automatically in
case of a black-out and subsequent reset.
WEAR EAR PROTECTION
IMPORTANT INFORMATION
Read and understand all of the operating instructions, safety
precautions and warnings in the Instruction Manual before
operating or maintaining this compressor. Most accidents
that result from compressor operation and maintenance
are caused by the failure to observe basic safety rules or
precautions. An accident can often be avoided by recognizing
a potentially hazardous situation before it occurs, and by
observing appropriate safety procedures. Basic safety
precautions are outlined in the “SAFETY” section of this
Instruction Manual and in the sections which contain the
operation and maintenance instructions. Hazards that must
be avoided to prevent bodily injury or machine damage
are identified by WARNINGS on the compressor and in this
Instruction Manual.
Use the
D
e
WALT
compressor only for the purpose for
which it was designed, such as: pneumatic nailing tools,
paint spraying, tyre inflating etc..
Always ensure that the
tool you are connecting has a suitable air pressure value.
MEANINGS OF SIGNAL WORDS
m
WARNING:
indicates a potentially hazardous situations
which, if ignored, could result in serious personal injury.
m
CAUTION:
indicates a hazardous situations which, if
ignored, could result moderate personal injury, or could cause
machine damage.
NOTE:
emphasizes essential information
Safety instructions
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE
COMPRESSOR.
m
WARNING: DEATH OR SERIOUS BODILY INJURY
COULD RESULT FROM IMPROPER OR UNSAFE USE OF
COMPRESSOR. TO AVOID THESE RISKS, FOLLOW THESE
BASIC SAFETY INSTRUCTIONS.
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS
Never place your hands,
fingers or other body parts near the compressor’s moving
parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
Never operate this compressor without all guards or safety
features in place and in proper working order. If maintenance
or servicing requires the removal of a guard or safety
features, be sure to replace the guards or safety feature
before resuming operation of the compressor.
3. ALWAYS WEAR EYE PROTECTION
Always wear safety
goggles or equivalent eye protection. Compressed air must
never be aimed at anyone or any part of the body.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces such as pipes,
radiators, ranges and refrigeration enclosures. Never operate
the compressor in damp or wet locations. Never leave the
appliance exposed to adverse weather conditions.
5. DISCONNECT THE COMPRESSOR
Always disconnect
the compressor from the power source and remove the
compressed air from the air tank before servicing, inspecting,
maintaining, cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING
Do not carry the
compressor while it is connected to its power source or when
the air tank is filled with compressed air. Be sure the knob of
the pressure switch in the “OFF” position before connecting
the compressor to its power source.
7. STORE COMPRESSOR PROPERLY
When not in use, the
compressor should be stored in dry place. Keep out of reach
of children. Lock-out the storage area.
8. KEEP WORK AREA CLEAN
Cluttered areas invite injuries.
Clear all work areas of unnecessary tools, debris, furniture
etc…
9. KEEP CHILDREN AWAY
Do not let visitors contact
compressor extension cord. All visitors should be kept safely
away from work area.
10. DRESS PROPERLY
Do not wear loose clothing or
jewellery. They can be caught in moving parts. Wear
protective hair covering to contain long hair.
11. DON’T ABUSE CORD
Never yank it to disconnect from
receptacle. Keep cord from heat, oil and sharp edges.
12. MAINTAIN COMPRESSOR WITH CARE
Follow
instructions for lubricating. Inspect cords periodically and if
damaged, have repaired by authorized service facility. Inspect
extension cords periodically and replace if damaged.
13. OUTDOOR USE EXTENSION CORDS
When compressor
in used outdoors, use only extension cords intended for use
outdoors and so marked.
14. STAY ALERT
Watch what you are doing. Use common
sense. Do not operate compressor when you are tired.
compressor should never be used by you if you are under
Summary of Contents for DPC10RC-GB
Page 1: ...DPC6MRC QS DPC6MRC GB DPC10RC QS DPC10RC GB DPC10RC LX DPC16PS QS DPC16PS GB DPC16PS LX ...
Page 196: ......
Page 197: ......
Page 198: ......