DeWalt DDF5110500, Manual

Page: 48 / 208

48
English
Cause(s) Measure(s)
No nails in the
magazine
See chapter 3.3,
"Inserting the Nail Strip"
Magazine slider not
retracted
Forbidden or
unauthorized nails in
the magazine See chapter 6.2,
"Permissible Nails and
Gas Cartridges"
Magazine "bent" or not
inserted properly
See the "Replacing
the Magazine"
section in chapter 2.6,
"Accessories"
Magazine slider spring
defective
Foreign object in the
barrel or magazine See chapter 4.3,
Removing stuck Nails"
Gas Nailer defective
Have the Gas Nailer
be repaired by an
authorized dealer.
Barrel is rmly pressed against the surface,
the motor is running, but the nails do not
penetrate deeply enough into the material
after pressing the trigger:
Cause(s) Measure(s)
Gas cartridge empty or
not lled to a suf cient
degree
See chapter 3.2, "Insert
Gas Cartridge"
Firing depth set too low
See "Setting the Firing
Depth" section in
chapter 4.1, "Using the
Gas Nailer"
Nails too long, diameter
too large
Use a nail that matches
the target material
Target material too hard
Nail strikes hard foreign
objects in the target
material, such as other
nails
Aim the Gas Nailer
elsewhere
Test the Gas Nailer
on a different target
material
Gas Nailer not pressed
rmly enough against
the target material Do not hold the Gas
Nailer "too loosely" in
your hands
Gas Nailer defective
Have the Gas Nailer
be repaired by an
authorized dealer.
Barrel is rmly pressed against the surface,
the motor is running, but the nails penetrate
too deep into the material after pressing the
trigger:
Cause(s) Measure(s)
Firing depth set too high
See "Setting the Firing
Depth" section in
chapter 4.1, "Using the
Gas Nailer"
Nails too short,
diameter too small
Use a nail that matches
the target material
Target material too soft
Nail strikes cavities or
soft foreign objects in
the target material
Aim the Gas Nailer
elsewhere
Test the Gas Nailer
on a different target
material
Loud or irregular fan noise:
Cause(s) Measure(s)
Air lter dirty
See chapter 5.1,
"Cleaning the Air Filter"
Fan defective
Have the Gas Nailer
be repaired by an
authorized dealer.
Gas odours (unburned combustion gases):
Cause(s) Measure(s)
When the barrel
is pressed against
a surface, the motor
directs an explosive
gas into the combustion
chamber. If the trigger
is not actuated, another
press causes the
unburned gas to escape
See chapter
1.5, "Device and
Operational Safety"