DeWalt DCS356N, Original Instructions Manual

Page: 7 / 20

English
5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
DCS355 DCS356
Voltage V
DC
18 18
Type 1/2/10/11 1/2
Battery type Li‑Ion Li‑Ion
Oscillating frequency min‑ 1 0–20000 0–20000
Oscillating angle 1.6˚ 1.6˚
Speed 1 min‑ 1 ‑ 15000
Speed 2 min‑
1
‑ 17000
Speed 3 min‑ 1 ‑ 20000
Weight (without battery pack) kg 1.1 1.1
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑4:
L
PA
(emission sound pressure
level)
dB(A) 86 86
L
WA
(sound power level) dB(A) 97 97
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission value a
h
= m/s 2 12.4 12.4
Uncertainty K = m/s 2 1.5 1.5
English (original instructions)
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
CORDLESS OSCILLATING MULTI‑TOOL
DCS355, DCS356
EC‑Declaration of Conformity
Machinery Directive
Cordless Oscillating Multi‑Tool
DCS355, DCS356
D
e
WALT declares that these products described under
Technical
Data
are in compliance with:
2006/42/EC, EN62841‑1:2015+AC:2015, EN62841‑2‑4:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT .
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT , Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
26.08.2021