7
English
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE:
Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP:
In case of an
insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
•
FOR YOUR sAFETY:
Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
•
Register online at
www.dewalt.com
Repairs
The LED, charger, and battery pack are not serviceable.
There are no serviceable parts inside the charger or
battery pack.
WARNING:
To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a
D
e
WALT
factory
service center or a
D
e
WALT
authorized service center.
Always use identical replacement parts.
Accessories
WARNING:
Since accessories, other than those
offered by
D
e
WALT
,
have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only
D
e
WALT
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact
D
e
WALT
call 1-800-4-
D
e
WALT
(1-800-433-9258) or visit our website: www.dewalt.com.
Cleaning
WARNING:
Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING:
Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Fig. E
8
9
Screw Threads (Fig. E)
Screw threads, 1/4"-20
8
and 5/8"-11
9
, are provided on
the handle of the task light to allow mounting to a tripod.
CAUTION:
Use only with
D
e
WALT
heavy-duty tripod
to ensure stability when mounted.
1. Place the tripod's mounting screw into the appropriate
screw thread on the base of the light and screw the
tripod to the light.
2. Ensure the light is securely attached.
Fig. D
3
Fig. C
7
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories.
An
accidental start-up can cause injury.
