9
FIG. 2
E
F
C
B
A
J
I
COMPONENTS (FIG. 2)
WARNING:
Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Trigger Switch
G. Unthreaded Backing Flange
B. Lock-Off Button
(not
shown)
C. Spindle Lock Button
H.
Threaded Clamp Nut
D. Spindle (not shown)
(not shown)
E. Side Handle
I. Guard (Type 1, Type 27)
F. Abrasive Wheel
J. Battery
INTENDED USE
The DC411-XE heavy-duty finishing grinder is designed for professional grinding,
cutting and sanding.
DO NOT
use under wet conditions or in presence of flammable
liquids or gases.
This DC411-XE heavy-duty finishing grinder is a professional power tool.
DO NOT
let
children come into contact with the tool. Supervision is required when inexperienced
operators use this tool.
Residual Risks
• In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of dust inhalation.
– Risk of personal injury due to prolonged use.
– Risk of burns due to accessories becoming hot during operation.
ASSEMBLY AND ADJUSTMENTS
Attaching Side Handle
The side handle (E) can be fitted to either side of the
E
gear case in the threaded holes. Before using the tool,
check that the handle is tightened se cure ly.
To improve user comfort, the gear case will rotate 90
˚
for cutting operations.
Rotating the Gear Case
WARNING: To reduce the risk of serious personal
injury, turn tool off and remove battery pack before
making any adjustments or removing/installing
attachments or accessories.
1. Remove the four corner screws attaching the gear
case to motor housing.
2. Without separating the gear case from motor
housing, rotate the gear case head to desired
position.
NOTE:
If the gear case and motor housing become separated by more than 3.17 mm
(1/8"), the tool must be serviced and re-assembled by a D
E
WALT service center.
Failure to have the tool serviced may cause brush, motor and bearing failure.
Summary of Contents for DC411-XE
Page 1: ...DC411 XE CORDLESS FINISHING GRINDER INSTRUCTION MANUAL ...
Page 2: ......
Page 22: ...20 ...
Page 23: ...21 ...
