ENGLISH
22
• Wear safety goggles or other eye protection.
Hammering and drilling operations cause chips
to fly. Flying particles can cause permanent eye
damage. Wear a dust mask or respirator for
applications that generate dust.
• Hammer bits and tools get hot during
operation.
Wear gloves when touching them.
•
Keep a firm grip on the tool at all times.
Do not attempt to operate this tool
without holding it with both hands.
It is
recommended that the side handle be used at
all times. Operating this tool with one hand will
result in loss of control. Breaking through or
encountering hard materials such as re-bar may
be hazardous as well.
•
Do not operate this tool for long periods of
time.
Vibration caused by hammer action may
be harmful to your hands and arms. Use gloves
to provide extra cushion and limit exposure by
taking frequent rest periods.
•
Do not recondition bits yourself.
Chisel
reconditioning should be done by an authorized
specialist. Improperly reconditioned chisels
could cause injury.
•
Never lay the tool down until the bit has
come to a complete stop.
Moving bits could
cause injury.
•
Do not strike jammed bits with a hammer to
dislodge them.
Fragments of metal or material
chips could dislodge and cause injury.
•
Slightly worn chisels can be resharpened by
grinding.
•
Keep the power cord away from the rotating
bit. Do not wrap the cord around any part of
your body.
An electric cord wrapped around a
spinning bit may cause personal injury and loss
of control.
Residual Risks
The following risks are inherent to the use of
chipping hammers:
–
Injuries caused by touching the hot parts of the
tool .
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing .
– Risk of squeezing fingers when changing the
accessory.
–
Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (h), which also includes
the year of
manufacture, is printed into the housing.
Example:
2009 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Chipping hammer
1 Side handle
1 Kitbox (K models)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING:
Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Lock-on slider
c. Chisel position index collar
d. Tool holder/locking sleeve
e. Dust cover
f.
Side
handle
g. Main handle
Summary of Contents for D25330 Series
