Configuration 28
devolo Magic 2 LAN
er) connected to the network interface is switched on again, your
devolo Magic adapter can also be accessed over the electrical
wiring again.
Standby mode is enabled in the devolo Magic adapter's factory
default settings.
For information on the LED behaviour of the
devolo Magic adapter in standby mode, refer to Chapter
2.3.1 Reading the indicator light
.
Password
You can set a login password for access to the web interface.
By default, the built-in web interface of the devolo Magic2 LAN
is not protected by a password. We recommend assigning a pass-
word when the installation of the devolo Magic2 LAN is com-
plete to protect it against tampering by third parties.
To do so, enter the desired new password twice. Now the web in-
terface is protected against unauthorised access with your cus-
tom password!
Firmware upgrade
The firmware of the devolo Magic2 LAN includes the software for
operating the device. If necessary, devolo offers new versions on
the Internet as a file download, for example to modify existing
functions.
햲
To bring the firmware up to the latest version, first go to the
devolo website,
www.devolo.com
, and download the
appropriate file for the devolo Magic2 LAN to your com-
puter.
햳
Then, navigate to the
System
Firmware upgrade
area.
Click
Choose…
and select the downloaded file.
햴
Confirm the update procedure with
OK
. After a successful
update, the devolo Magic2 LAN restarts automatically.
Ensure that the update procedure is not inter-
rupted.
4.2.5 Reset
Here, restart the devolo Magic adapter and/or restore it to the
factory default settings.
Restart device
To restart a devolo Magic adapter, click
Restart
.
Fig. 8: Restart and reset
Summary of Contents for Magic 2 LAN1-1
Page 1: ...Manual devolo Magic 2 LAN1 1 ...
Page 2: ...devolo Magic 2 LAN1 1 ...