Configuration 26
devolo Magic 2 LAN
You can access the web interface for the devolo Magic2 LAN us-
ing its current IP address. This may be an IPv4 and/or IPv6 ad-
dress, which is either entered manually as a static address or
automatically retrieved from a DHCP server.
IPv4 configuration
In the factory default settings, only the
DHCP enabled
option for
IPv4
is enabled. This means that the IPv4 address is retrieved ax-
iomatically from a DHCP server. The currently assigned network
data is visible (greyed out).
If a DHCP server is already present on the network for giving out
IP addresses (e.g. your Internet router), you should enable the
DHCP enabled
option so that the devolo Magic2 LAN automat-
ically receives an address from it.
If you want to assign a static IP address, make entries accordingly
for the
IPv4 address
,
IPv4 netmask
,
Default gateway
and
DNS
fields.
Confirm your settings with
OK
.
Then, restart the devolo Magic adapter (see Chapter
4.2.5 Re-
set
) to ensure that your changes take effect.
IPv6 configuration
If you want automatic IP address assignment and there is already
a DHCP server present on the network for giving out IP addresses
(e.g. your Internet router), enable the
DHCPv6 enabled
option
to ensure that the devolo Magic2 LAN automatically receives an
address from this device.
If you want to assign a static IP address, make entries accordingly
for the
IPv6 address
,
IPv6 prefix
,
Default gateway
and
DNS
fields.
IPv6 link-local address
: In the case of IPv6, the devolo Magic
adapter always has a fixed address which can be used to access
it within the connected Ethernet or PLC network segment. This
link-local address is derived from the Ethernet MAC address.
IPv6 link-local prefix
: Corresponding format prefix for link-lo-
cal addresses
IPv6 SLAAC address
: Using the SLAAC method (
S
tate
l
ess
A
d-
dress
A
uto
c
onfiguration), the devolo Magic2 LAN automatically
generates an IP address by itself.
IPv6 SLAAC prefix
: Corresponding format prefix for SLAAC ad-
dresses
Confirm your settings with
OK
.
Then, restart the devolo Magic adapter (see Chapter
4.2.5 Re-
set
) to ensure that your changes take effect.
4.2.4 System
In the
System
area, you can configure the settings for security
and other devolo Magic adapter device functions.
Summary of Contents for Magic 2 LAN1-1
Page 1: ...Manual devolo Magic 2 LAN1 1 ...
Page 2: ...devolo Magic 2 LAN1 1 ...
