|
Initial use
13
|
devolo dLAN 200 AV Wireless G
|
The
WLAN antennas
provide the connection to other wireless network devices.
You can angle the antennas to adjust the transmission and reception power
appropriately according to the installation location.
Note that the
WLAN function is enabled
and
WLAN encryption is disabled
when the device is set to its
factory defaults
.
2.3
Connecting the dLAN 200 AV Wireless G
Firmware note
: If you would like to use a dLAN 200 AV Wireless G together
with devolo
dLAN 200 AV devices using firmware version 1.x, please update the
firmware of the dLAN 200 AV devices first. For more information, refer to the
chapter 2.4.1 on 'Firmware update'. The firmware updater application can be
found in the download section of our website at www.devolo.com.
Connect the dLAN 200 AV Wireless G to your computer or other network
devices using a network cable.
Plug the dLAN 200 AV Wireless G into a free electrical outlet. Ensure that
the device is fully inserted in the outlet.
If possible, do not plug the adapter into a power strip. This may impair the trans-
mission of the dLAN signals. A free wall outlet is preferable.
2.4
Software installation
2.4.1
Software for Windows
Use the installation wizard in the
Software
왘
dLAN
folder to set up the follow-
ing software components for using the device with the Windows operating sys-
tem:
쎲
The
devolo dLAN Configuration Wizard
lets you set up custom encryption
for your dLAN 200 AV network.
쎲
devolo Informer
finds dLAN devices in a dLAN network and displays infor-
mation on the devices found.
쎲
The
dLAN 200 AV Wireless G configuration
application starts the inte-
grated configuration interface of your dLAN 200 AV Wireless G.
To install the software, insert the included CD-ROM in the CD drive of your com-
puter. If autoplay is installed on your computer, the installation will start auto-
matically. Otherwise, open the folder with the Windows Explorer by right-
Summary of Contents for 200 AV Wireless G
Page 1: ...dLAN 200 AV Wireless G...
