Devine 9000-0012-9203 User Manual Download Page 5

- Avoid the buildup of dust and dirt. Clean the exterior of the fixture once a month with a dry or damp cloth. If 
you use the device intensively, increase cleaning frequency.

Fuses:

- The main fuse of this device is located on the rear of the device, usually directly next to the power inlet. 
- Only replace a fuse with a new one of the same type and rating! Do not use a fuse with a higher or lower 
rating.
- Do not bridge the fuse with electrical wires or aluminum foil, as the fuse is intended to prevent electrical 
shocks and short circuits. 
- Always mount the fuse cover back on the fuse compartment.

Symbol clarification:

WEEE: 

Dispose of this product properly. This product is part of the WEEE directive – the 

Waste Electrical and Electronic Equipment directive. The requirements stated in this directive 
apply to all manufacturers and producers of electronic equipment in the EU. 

Do not dispose of this product together with regular household trash. Contact your local 
government for more information about proper disposal and recycling of electronic products in
your region. By recycling this product properly after use, we can work together to enjoy these 
products and protect our environment from pollution.

CE: 

The CE mark indicates that the product complies with applicable European directives and

regulations. 

Indoor use only: This device is designed to be used indoors only. The maximum ambient 
temperature should not exceed 40 degrees Celsius (104 degrees Fahrenheit).

Contact:

Devine pro audio products

Verrijn Stuartweg 18

4462 GE Goes

The Netherlands

Please do not send any products directly to this address. If you wish to return a product for a refund or

repair, please contact your local dealer for an RMA (Return Material Authorisation)

Any information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 4.0

Creation date + author initials: 11-12-2015 RV Revision date + author initials: 10-12-2015 RV

Summary of Contents for 9000-0012-9203

















Reviews: