Devine 9000-0012-9203 User Manual Download Page 3

Safety instructions

This unit must be operated by, or under the supervision of an adult. This device is not suitable for children. 

Every person involved with the installation, operation and maintenance of this device must:
- Be qualified
- Follow the instructions in this manual
- Make sure there is no damage to the device caused by transport. If the device seems damaged from the 
outside, do not use it and contact your dealer for more information.
- Make sure the device is in perfect condition and safe to operate. Follow the instructions and adhere to the 
warning notes in this user manual.
- Damage caused by improper use or modifications to the device are not covered by the warranty.
- This device does not have any user-serviceable parts inside. This device must be serviced by qualified 
technicians.

Important notes regarding health and safety:

- Never allow the power cord to come into contact with other cables. Handle the power cord and all mains 
connectors with caution.
- Never remove any warning or informative labels from the unit.
- Never leave cables lying around.
- Do not open the device and do not modify any hardware or software.
- Do not insert objects into the air vents of this device.
- Do not connect this device to a dimmer pack.
- Do not switch the system on and off frequently, as this will reduce the lifespan of the device.
- Do not power the inputs of the fixture with a signal greater than required to work at full performance.
- Use this device indoors only, avoid contact with water, moisture and other liquids. Do not place items filled 
with liquids on top of the unit.
- Avoid nearby flames or heat sources, do not place this device near flammable liquids, gas or flammable 

Any information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 4.0

Creation date + author initials: 11-12-2015 RV Revision date + author initials: 10-12-2015 RV

WARNING!

Always keep this device away from moisture and rain! Hazardous electrical shocks may occur!

WARNING!

Only connect this device to a suitable power outlet. This device is intended to work on a specific 
AC current. Connecting it to power outlets with other voltages may result in permanent damage 
and possible hazardous situations, such as fire or electric shocks!

WARNING!

Be careful when operating this device. Touching live wires inside and/or outside the unit may 
cause hazardous electric shocks!

Summary of Contents for 9000-0012-9203

















Reviews: