EN - 20
BR-DV53
Display Example
Description
Mode
Tubing Length
1.8 m (6 ft)
The standard tubing length supplied with the device is 6 feet (1.8
meters). However, you can adjust your device to accommodate an air
supply tubing length of 10 feet (3.0 meters). Replacement tubing can
be obtained through your home care provider (part numbers listed at
the end of this manual).
All
SmartFlex Menu
Press
Pressing the down key enters the SmartFlex menu. Refer to
SmartFlex Menu section for details
All
Enable Menu
Press
Pressing the down key enters the Enable menu. Refer to next section
for Enable Menu details.
All
LCD Contrast Adj
50 %
This setting changes the contrast for the LCD display. This only needs
to be adjusted if you fi nd it diffi cult to see the display from your
viewing angle.
All
Compliance Meter
123456.7 hours
The total number of hours (in 1/10 hour increments) that the device
has been providing therapy.
All
Hourmeter
HD123456
The total number of hours (in 1/10 hour increments) that the device
has been in operation.
Firmware Version
V0.19 21/08/2009
Shows version of installed fi rmware.
All
Serial Number
HD123456
Shows the serial number of the device.
All
Adherence Score
83% (25/30)
Shows the maximum adherence achieved for any period of thirty
consecutive days of use within a ninety-day time frame. The score
represents the percentage of days, within thirty consecutive days,
where usage met or exceeded the ‘Usage Threshold.’
All
SmartCode
1-Day
F6CD-37F-357R
SmartCode
7-Day
3CCC-377D-7J7X
SmartCode
30-Day
DWY4-3DB7-DJ7L
SmartCode
90-Day
752TT-47DB-7DT7C
SmartCode
Usage
ZDN-79FK-K7H
SmartCode data is used for therapy management reporting; therapy
information is encoded in a series of letters and numbers, and
includes a special character for error checking to ensure accuracy.
Use the UP arrow or DOWN arrow keys to change the SmartCode
reporting period. There are fi ve levels of SmartCode data – 1-day,
7-day, 30-day, 90-day and Usage. Use UP or DOWN button to change
between levels.
All
NOTE- If the unlocked symbol is shown, you are able to adjust this setting. If the locked symbol is shown, this setting can
only be adjusted by your provider.