User Manual Rollator Cristallo 2
7
Drive Medical GmbH & Co. KG | As per: 05/2019 | Subject to error and change
EN
Adjusting the armrest
Loosen the locking lever underneath the armrest by
moving it anti-clockwise. Adjust the break lever to the
desired position. The brake lever must be pushed in at
least up to the “Max” mark. Then re-tighten the locking
lever by turning it clock-wise. (Fig. 7)
Breaking / Parking
Pull both brake levers backwards to apply the brakes
whilst the rollator is moving (picture 8). Always brake
slowly and steady.
To lock the brakes, ensure the Rollator is stationary and
press both brake levers forward until they lock into posi-
tion (picture 9).
To release the brakes from the locked position, pull
back on the brake levers. (both brakes are in a middle
position).
The eff ect of the brakes can be aff ected by abrasion of
the wheels. Therefore regularly test the brakes.
Adjustment of brakes
For desired braking strength adjust the brake either
manually at the screw on the housing of the brake
(picture 10) or with the suitable tool (not included) on the
brake wire (picture 11).
Sitting
• Position the rollator on a fl at and solid surface.
• Then lock the brakes (parking position).
• The rollator must stand and must not slip.
• Sit straight up and do not lean backwards.
• Please refer to the picture below for the correct seating
position.
13
10
11
7
12
8
9