Website:
www.devicewell.com
Email:
25
HDS6112
The default audio mode of the device is audio follow-up (the audio source is SDI input). If
pressed Master, the volume output is turned on. The volume level corresponds to the position of
the audio fader. Push the fader to adjust the volume of the following audio.
7.4.2.2
Audio Embedding
After accessing the Canon audio, operate any audio channel of the mixer SRC1/SRC2/SRC3
to control the external embedded audio. The volume level corresponds to the position of the audio
fader. Turn on the MASTER master volume audio channel, at this time the PGM source is
externally embedded. At this time, the push fader can adjust the volume of the embedded audio
and control the PGM output volume.
7.4.2.3
Mixing mode
The knob can be switched to the mix mode (default follow mode). After setting to the mix mode,
press INPUT1, INPUT2, and INPUT3
to turn on the mix mode. Up to 3
channels can be mixed. The sound can be adjusted by the audio fader. .
7.4.2.4
Audio Source Switching
Press the SRC1, SRC2, SRC3
to bind the source of the audio channel
multiple times. The default order is multi-screen preview channel 1 – 8 channel audio source and
then external audio input source.
7.4.2.5
Audio Monitoring
The HDS6112 supports audio live monitoring. The 3.5mm standard headphones can be used
to monitor the specified audio. By default, the PGM live video is monitored. By pressing the
LISTEN
on the mixer, you can monitor any audio.
7.5
Special effects instructions
7.5.1
MIX Transition Effects
