
Website:
www.devicewell.com
Email:
support@devicewell.cn
22
HDS6112
7.3.3
Transition control
The transition control method of DeviceWell HDS6112 portable switcher is mainly divided
into two types, one is transition special effect, and the other is transition mode without transition
special effect.
1
、
No transition effect: Press CUT, CUT button is hard cut. If you select the preview
(PVW) screen to switch directly to the main output (PGM), because there is no delay
seamless switching, there is no transition effect.
2
、
There are transition effects:
-stored transition time
in the user-defined area, as shown below, (displayed red after pressing).
●Then select the transition effect, the transition effects have been connected: MIX,
FADE, WIPE, INV mirror button (special effects more details after this). At last
press AUTO , you can make a transition with the special effects.
● The putter transition, the putter transition is consistent with the AUTO effect
setting. The difference is that the speed of the push determines the speed of the
transition is proportional and flexible.
●The T-bar transition, the T-bar transition is consistent with the AUTO effect setting.
The difference is that the speed of the push determines the speed of the transition is
proportional and flexible.