Develop ineo 250, Service Manual Field

Page: 448 / 770

Field Service Ver. 1.0 Aug. 2005 11. Soft Switch List
79
FK-503
Adjustment / Setting
MODE Factory setting bit
044
Bit: 7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 0
HEX:80
Bit Feature
Logic
Description
0 1
7 Select threshold value for
RTN sending error trace. 32 lines
or more 64 lines
or more Specifies # of error lines as reference of
sending RTN:
• “32 lines or more”:
MCF if error lines are 0 - 31, RTN if
error lines are 32 or more
• “64 lines or more”:
MCF if error lines are 0 - 31, RTP if
error lines are 32 to 63, RTN if error
lines are 64 or more
6 Process TCF sending
specially. No Yes
4 Select T4 timer (Action
against line delay). 3 sec 4.5 sec
3 Take an action for com-
munication error from
overseas (Action against
LMCD-OFF). Yes No • Select “No” unless bad line is experi-
enced.
2 Take an action for com-
munication error from
overseas (Action for fall
back). Yes No • Select “No” unless bad line is experi-
enced.
1 Process RTN RX failure. discard
as error not as
error
0 Retrain V. 34 control
channel. Yes
(discard
as error) No
(not as
error)