Develop ineo 250, Service Manual Field, Page: 436 / 770

Field Service Ver. 1.0 Aug. 2005 11. Soft Switch List
67
FK-503
Adjustment / Setting
NOTE
• This is valid only when “Allow service call? (MODE 026 Bit 6)” is set to “Yes.”
MODE Factory setting bit
024
Bit: 7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 1
HEX:81
Bit Feature
Logic
Description
0 1
5 Display Administrator/
User passwords. Yes No
4 Display forwarding func-
tion button. No Yes
3 Select alarm buzzer pat-
tern. Pattern 0 Pattern 1 Pattern 0: Peep Poop Peep Poop Peep
Poop
Pattern 1: Peep Peep Peep
2 Select ID display order
when receiving. Bit 2-1: 00 Expansion
IDT
→
TSI
1 01 TSI
Others Not available
0 Receive by other user. No Yes
MODE Factory setting bit
025
Bit: 7 6 5 4 3 2 1 0
0 1 1 1 1 1 1 1
HEX:7F
Bit Feature
Logic
Description
0 1
6 Service call for printer
option failure. No Yes Specifies whether to make a service call
for PC printer unit option failure. <Note>
5 Service call for printer fail-
ure. No Yes Specifies whether to make a service call
for printer failure. <Note>
4 Service call for scanner
failure. No Yes Specifies whether to make a service call
for exceeding specified # of papers.
<Note>
1 Service call for reaching
near empty cycles of
toner. No Yes Set whether to make a service call for
reaching near empty or empty cycles of
toner. <NOTE>
0 Service call for reaching
life times of drum. No Yes Set whether to make a service call for
reaching near life time or life times of
drum. <NOTE>