manualshive.com logo in svg

Develop ineo 250, Service Manual Field, Page: 217 / 770

Share
Download
Develop ineo 250 Service Manual Field Download Page 217

11. Tech. Rep. Mode

Field Service Ver. 1.0 Aug. 2005

178

bizhub 200/250/350

Adjustment / Setting

6

Setting the Center ID and telephone number of 
the Center
1. Select [Tech. Rep. Mode] 

→

 [CS Remote 

Care], and touch [Detail Setting].

2. Touch [Basic] 

→

 [Center ID], and input the 

Center ID (five digits).

☞

186

3. Touch [Center Phone No].
4.  Input the telephone number of the Center 

using the 10-Keys Pad and [P], [T], [W], [-] 
keys.

☞

186

Setting the Center ID
1. Select [Tech. Rep. Mode] 

→

 [CS Remote 

Care], and touch [Detail Setting].

2. Touch [Basic] 

→

 [Center ID], and input the 

Center ID (five digits).

☞

186

7

Setting the Device ID
3. Touch [[Fwd] 

→

 [Device ID], and input 

Device ID (nine digits).

☞

186

Setting the Device ID
4. Touch [Device ID], and input Device ID (nine 

digits).

☞

186

8

Inputting the Device telephone number
5. Touch [Device Phone No].
6. Input the Device telephone number using the 

10-Key Pad and [P], [T], [W], [-] keys.

☞

186

Setting the Respond Timeout
1. Select [Tech. Rep. Mode] 

→

 [CS Remote 

Care], and touch [Detail Setting].

2. Touch [Respond Timeout] and enter the 

response timeout using the 10-Key Pad.

NOTE
• Under normal conditions, there is no 

need to change the default setting.

☞

187

9

Inputting the AT command for initializing the 
modem
1. Select [Tech. Rep. Mode] 

→

 [CS Remote 

Care] 

→

 and touch [Detail Setting].

2. Touch [AT Command].
3. Input AT Command.
NOTE
• Change this Command only when it is 

necessary. (They do not need to be 
changed in normal condition.)

• For details on AT Command, see the man-

ual for the modem.

☞

188

Setting the E-mail address
1. Select [Tech. Rep. Mode] 

→

 [CS Remote 

Care] 

→

 and touch [Server Setting].

2. Touch [Initial data].
3. Select [Yes] and touch [Enter] to perform ini-

tialization.

4. Touch [Server for RX] and set POP3 Server 

Address, POP3 User Name, POP3 Pass-
word, and POP3 Port Number.

☞

188

5. Touch [RX Settings] and set E-Mail Address, 

Auto-RX Check, Connection Timeout, and 
APOP Authentication.

☞

188

6. Touch [TX Settings] and set SMTP Server 

Address, SMTP Port Number, Connection 
Timeout, and Authentication Setting.

☞

189

7. Touch [TX/RX Test] and press the Start key 

to carry out the transmission/reception test.
Make sure that data is correctly transmitted 
and received and then proceed to the next 
step. If the test fails, make checks again by 
following the instructions given as the error 
message; then, carry out the transmission/
reception test once again.

☞

190

Step

Procedure

Using the telephone line modem

Using E-mail

Summary of Contents for ineo 250



































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments