FrameMaker Ver.5.5E(PC) Di152/Di183 TROUBLESHOOTING
01.09.04
T-9
Misfeed at Multiple Bypass Tray J06 Troubleshooting Procedures
Step
Check
Result
Action
5
Manual Bypass Solenoid (SL2) is
operational when the Start key is
pressed.
<Check Procedure>
Check voltage across a Master Board
(copier: PWB-A) pin and GND.
• Voltage across PJ4A-2 and GND
In standby: DC24 V
When pressed: DC0 V
NO
• Change Manual Bypass Solenoid
(SL2).
6
Manual Feed Paper Sensor (PC2) is
operational.
<Check Procedure>
Check voltage across a Master Board
(copier: PWB-A) pin and GND when
the sensor is blocked.
• Voltage across PJ4A-5 and GND
When unblocked: DC5 V
When blocked: DC0 V
NO
• Change Manual Feed Paper Sen-
sor (PC2).
7
Synchronizing Roller Sensor (PC1) is
operational.
<Check Procedure>
Check voltage across a Master Board
(copier: PWB-A) pin and GND when
the sensor is blocked.
• Voltage across PJ6A-3 and GND
When blocked: DC5 V
When unblocked: DC0 V
NO
• Change Synchronizing Roller Sen-
sor (PC1).
YES
• Change Master Board (copier:
PWB-A).
Step
Check
Result
Action
1
Paper meets product specifications.
NO
• Change paper.
2
Paper is curled, wavy, or damp.
YES
• Change paper.
• Instruct user to load paper that
meets product specifications.
3
Paper Guides are at correct position
to accommodate paper.
NO
• Adjust as necessary.
4
• Paper Take-Up Roll drive shaft
(Multiple Bypass Tray) turns when
the Start key is pressed.
NO
• Reinstall.
Summary of Contents for D1531iD
