FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-35
(4)
Replacement of the ATDC Sensor
1. Divide the IU into the Cleaning Assy and Developing Assy.
2. Remove the Developer Scattering Prevention Plate and dump developer.
4. Install the ATDC Sensor.
5. Pour developer.
6. Reinstall the Developer Scattering Prevention Plate.
7. Mount the Cleaning Assy to the Developing Assy.
8. Install the IU in the copier and run F8 operation.
9. Enter the adjustment value on the Adjust Label.
<<Area to which toner is to be applied>>
4021U057AA
20
-
3
0
mm
10 - 15 mm
20 - 25 mm
PC Drum
3. Hold both ends of the PC Drum with your both
hands and turn the PC Drum a half turn in the
direction of the arrow.
4021U009AA
3. Unplug one connector, and remove one screw
and the ATDC Sensor.
Summary of Contents for D1531iD
