Develop D1531iD, Service Manual

Page: 174 / 259

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-11
3. Setting in the Administrator Mode
Code No.
Setting (The default is ).
U-5
<Administrator Mode>
Allows for setting two functions, “Copy Track” and “Disable Auto Shut
OFF.”
Ad1
<Copy Track>
Allows for making the six different subfunctions.
Ad2
<Disable Auto Shut OFF>
Select whether to allow the option “0” to be select in User’s choice
function no.17.
<Procedure>
1. Enter “2” from the 10-Key Pad.
2. Press the Start key to show the current setting value.
3. Press the Clear key to reset the current setting value.
4. Enter the new setting value from the 10-Key Pad.
5. Press the Start key to validate the new setting value just entered.
A-1
<Copy Track>
Select whether to enable or disable Copy Track. (Up to 20 different
accounts can be controlled under Copy Track.)
<Procedure>
1. Enter “1” from the 10-Key Pad. (Display: A-1)
2. Press the Start key to show the current setting value.
3. Press the Clear key to reset the current setting value.
4. Enter the new setting value from the 10-Key Pad.
5. Press the Start key to validate the new setting value just entered.
A-2
<Input Account>
Using the 10-Key Pad, enter a 3-digit access number that can range
from 001 to 999. The access number corresponds to the account
number.
<Procedure>
1. Enter “2” from the 10-Key Pad. (Display: A-2)
2. Press the Start key. This will blank out the Display.
✽
If 20 accounts have already been programmed, the contents of the
Display alternate between “A-2” and “blank.”
3. Enter the access number from the 10-Key Pad.
4. Press the Start key to validate the access number just entered.
✽
If the access number just entered already exists, “Err” appears on
the Display and then the Display blanks out.
In this case, perform steps 3 and 4 again.
Highlighted
Setting 0
Description Authorized Not authorized
1
Setting 0
Description Copy Track enabled Copy Track disabled
1