Applications
Orbitor 6000 Installation & Applications Guide —
2.9
Define an IP Static Route
Static IP routes may be defined when one specific router is to be used to reach a
destination IP network. The static route will have precedence over all learned RIP routes
even if the cost of the RIP learned routes is lower.
1.
Edit Static Route
Location:
Main
Configuration
IP Routing Set up
IP Routes
Edit Route
Route IP Address
Route
Cost
Each static IP route is defined in the Edit Route menu. The destination
network IP address is specified when you first enter the menu and then
the IP address of the next hop route and the cost may be defined.
Once all of the static IP routes are defined they may be viewed with the
Show Static Routes
command from the IP Routes menu.
Configuration:
On ISDN Orbitors, when the IP routing protocol is set to none, the subnet
Note
mask size must also be defined when creating a static route entry. The
subnet mask is required to allow for a static route to be created to a different
IP network address.
The configuration options described here are only for initial set up and configuration
purposes. For more complete information on all of the configuration parameters
available please refer to the Menu Reference Manual file on the accompanying
disks.
