manualshive.com logo in svg

Develcon Electronics Orbitor 6000, Installation & Application Manual

Share
Download
Develcon Electronics Orbitor 6000 Installation & Application Manual Download Page 2

856 - 51

st

 Street East

Saskatoon, Saskatchewan (SK)
S7K 5C7
CANADA

Telephone: (306) 933-3300

Fax: (306) 931-1370

Quality System registered as compliant with ISO9002:1987 by Warnock Hersey (Certificate # 167-0027-28)

Develcon warrants that the product contained in this package shall be free from defects in materials and workmanship and will conform to
applicable specifications and other descriptions as provided by Develcon for the LIFETIME OF THE PRODUCT. [Lifetime is defined as a
maximum of 2 years after official product discontinuation.]  Develcon’s liability herein, whether based upon breach of warranty or contract or
negligence in manufacture, shall be limited to replacement or repair at Develcon’s election of all such defective or nonconforming items.
Develcon shall have the right prior to return to inspect at Buyer’s location any items claimed to be defective or nonconforming.

The foregoing constitutes the sole and exclusive remedy of the Buyer and exclusive liability of Develcon and is in lieu of any and all other
warranties expressed or implied or statutory as to merchantability, fitness for purpose sold, description, quality, productiveness, or any other
matter. Without limiting the foregoing, in no event shall Develcon be liable for the loss of use or profit or other collateral, special or
consequential damages.

Prior to returning any unit for warranty or non-warranty service, the Buyer is required to obtain a Material Return Authorization Number
(MRA) from Develcon. The cost of shipping the equipment from the Buyer’s location back to Develcon shall be paid by the Buyer. The cost
for return shipping of the equipment shall be paid by Develcon. Develcon shall utilize surface shipping carriers. Develcon will utilize other
means of express shipment at the request of the Buyer. In this case, the cost of shipping shall be paid by the Buyer.

Information in this document is subject to change without notice. Every effort has been made to supply complete and accurate information;
however, Develcon Electronics Ltd. assumes no responsibility for any errors that may appear in this document.

To submit documentation suggestions and errors please photocopy the first page of this document and mail or fax to:   Manuals @ Develcon,
856 - 51

st

 Street East, Saskatoon, SK  S7K 5C7, CANADA

Suggestions and inquiries may be submitted by e-mail to: [email protected].
Product information may also be obtained from our World Wide Web server: www.develcon.com.

Summary of Contents for Orbitor 6000








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands