- 7 -
Step 1.9
Put a barrel beside the unit,
and then turn on the water
filling controller to let the
water flow over the filter for
30seconds, till the water from
left side is clean
Step 1.10 Take off the anti-drain plug
from back of the unit, then
connect water pipe left to the
inlet hole(the left one)
Step 1.11 Insert the water filling
pipe(1m) to the drain hole(the
right one)
Step 1.12 If you need to take off the
pipe or replace it,please do
as follows:
Firstly take off the blue ring
named as A,then press the
white ring at the outer side
named as B,At last take out
the pipe
Step 2
Plug in.
Step 3 Timer setting: before press button ON/OFF, press button TIMER/CLEAN, the indicator
TIMER will light up, press or - to adjust the timer waken up time. If the timer function is
set, the indicator will light up
Step 4 Press button ON/OFF, unit starts to make ice, LED screen will show ambient
temperature
Step 5 Adjustment of ice making time: You can change the ice size by adjust the ice making
time as follow, at the last 10minutes before ice harvest, the LED screen will flash, press + or - to
adjust the ice making time for next cycles. One press of ,data 1 will be shown on the
