background image

- 3 - 

3  Filter Connector 

option 

4  Adaptor 

Water Follow 
Controller 

Filling Water 
Pipe(1m) 

Filling Water 
Pipe(40cm) 

8  Ice Scoop 

Function 

Instant making ice 
Ice full alarming,add water water alarming 
Crystalline ice in square 

Before/First Use of Your Ice Maker

 

1.During transportation, the incline angle of the cabinet should not be over 45° .Do not turn the

Ice maker upside down. As this may damage the compressor and sealed system.

2.Remove all packing material and carefully check your ice maker to ensure it is in good

condition and that there is no damage to the ice maker or power cord and plug.

3The ice maker should be placed horizontally on a level surface. To ensure proper ventilation for 
  your ice maker allows 150mm of space at the top, the back and on each side. Do not install 
  the Ice maker near an oven, radiator, or any other heat source. 

 

4.Before using the Ice maker for the first time, please wait 2 hours after positioning it, and keep

the front lid opens for at least 2hours

5.Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
6.Pure water is not allowed to be used on this unit, spring water is recommended.

Safety Notes 

Summary of Contents for ZB-250










Reviews: