dS378
dS378
User Manual v2.19
Webpage security
Allows you to prevent unauthorised personnel from accessing the application webpage or using
it to control the module.
Leaving the Security Password blank will disable it and allow everyone to access the application
page to control the module.
To enable password protection enter a password into the Password box. You can use any
characters from the ASCII character set from 0x20 to 0x7E except “ (0x22). It may be up to
200 characters long and you don't have to memorise it, so make it a long one with plenty of
uppercase, lowercase, numbers and symbols.
Accessing a special webpage, _pw.htm, will install the password on your browser. To do this
make sure the Enable _pw.htm box is checked.
When the “Update Pending” light goes out, re-boot the module and go to
yourIP/_pw.htm
Copyright
© 2016-2017,
Devantech Ltd.
All rights reserved.
12
www.pishrobot.com
