dS28
dS28
32
32
User Manual v4.10
Your browser won't know you have changed the IP address so it will still be showing the old,
now dead page. Make sure you change to your new IP address and load the page again.
Webpage security
The webpage security section allows you to prevent unauthorised personnel from accessing the
application webpage or using it to control the module.
Leaving the Security Password blank will disable it and allow everyone to access the application
page to control the module.
To enable password protection enter a password into the Password box. You can use any char-
acters from the ASCII character set from 0x20 to 0x7E except “ (0x22). It may be up to 200
characters long and you don't have to memorise it, so make it a long one with plenty of upper-
case, lowercase, numbers and symbols.
Accessing a special webpage, _pw.htm, will install the password on your browser. To do this
make sure the Enable _pw.htm box is checked.
When the “Update Pending” light goes out, re-boot the module and go to yourIP/_pw.htm
You will see something like this:
Copyright
© 2016-2022,
Devantech Ltd.
All rights reserved.
12
