65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 33 -
There are three control states in
Bandscan page
–
Span
control,
Marker
control and
Parameter
control. The states can be identified by the labels of the Soft buttons. If the labels appear as shown
on the picture below, the page is in
Marker
control state.
For example: When the following menu is selected pressing
SB3
will change the screen from
Marker
to
Span
control and vice-versa. All Soft buttons labels will change according to the sub-
menu. The control state of the page will change upon every
SB3
pressing.
Pressing the
OK
button either in
Marker
or
Span
control state will make transition to
Parameter
control state. The screen will be visible until the
OK
button is pressed again or the timeout of 2
seconds elapses.
Diagram representing the control state transitions:
Span control
state
Marker control
state
Parameter
control
state
SB3 press
2 sec timeout
2 sec timeout
OK press
OK press
