DEUTSCHMANN AUTOMATION V3470E, Short Instruction

Page: 15 / 21

Operation of the „data component simulator“ Deutschmann Automation GmbH & Co. KG
15
Starterkit ROTARNOCK with PROFIBUS V. 1.2
3.12.13
Select „laden und Übertragung starten“ afterwards.
After a short moment you can see the current position and the „address index“ should be running
continuously.
Output 1 should now be set from „0-100“ (h0 - h64)
Besides, the output status should change when the shaft is turned to a position between 0 and
100.
If you change a value, then the changed data has to be transferred to the PROFIBUS. This is
made by selecting „Aktualwerte übertragen“ with the left mouse button.