DEUTSCHMANN AUTOMATION V3470E, Short Instruction

Page: 10 / 21

3.12.13
Starterkit ROTARNOCK with PROFIBUS V. 1.2
10
Deutschmann Automation GmbH & Co. KG Operation of the „data component generator“
3 Operation of the „data component generator“
Start „S7DBGenerator“ (provided that it has not been started through WINLOC32 yet) and switch
the language to English by left click on the English flag.

(For further operation of the DBGenerator the Help menue is available)

The software „S7DBGenerator.exe“ received all cam values.
The line „angle-angle-cams“ should now contain the value „6“ (=number of angle-angle cams,
that have been set in WINLOC32).
If desired, the value can also either be increased or reduced. If a value is defined > 6, then the
first 6 cams are set in accordance with the WINLOC32-file and the following remain empty. If a
value < 6 is selected it results in a deprecuation of value!