8
Select temperature offset
. Scrolling message
will show “
TEMPERATURE ADJUSTMENT
”.
Your thermostat was accurately calibrated at the
factory, however this option allows you to change
the display temperature to match your previous
thermostat if you prefer. Default is 0° with current
temperature. Adjustment can be made from 5°F
Lo to 5°F HI to change the displayed temperature.
Touch
Run Schedule
at any time to exit the Menu
and return to Home Screen Display.
Select temperature display
as Fahrenheit or
Celsius. Scrolling
message will show “
SELECT
TEMPERATURE DISPLAY
”. This option selects
the temperature display as °F or °C.
Select beeper
(audio prompt) Default is On for the
beeper to indicate a touch key selection. It can be
changed to OFF.
Select air filter maintenance reminder
. Scrolling
message
will
show
“
AIR
FILTER
MAINTENANCE
”. Default is OFF. It can be
changed to a setting from 25 to 1975 hours in
increments of 25 hours to select the amount of
time for the reminder. Consult your installer for the
hours and type of filter.
When the system has run for the selected length
of time, the scrolling message area will show
“
CHANGE
FILTER
” to indicate maintenance is
required.
Select UV lamp maintenance reminder
.
Scrolling message will show
“
UV
LAMP
MAINTENANCE
”. Default is OFF. It can be
changed to a setting from 25 to 1975 days in
increments of 25 days to select the amount of time
for the reminder. Setting of 350 days is an annual
reminder.
Based on this setting, the scrolling message area
will show “
CHANGE UV LAMP
” to indicate
maintenance is required.
