13
Each Equipment User Menu has submenus to divide the information into categories. Each equipment has a
different set of submenus, with different parameters depending on the equipment. The submenus are showing
similar information for each equipment. The submenus and the information they provide are:
Tableau 1: User Menus
Status
Used to display or modify equipment settings
Fault History (FAULT HIST)
Displays information on the last six faults by code
and description that occurred throughout the
system and the number of days ago that the fault
occurred.
2 Week History (2 WK HIST)
Displays information on the number of hours of
unit/mode operation and the number of cycles the
unit has operated in for the last two weeks.
Life History (LIFE HIST)
Displays information on the lifetime number of
hours of unit/mode
operation and the number of cycles the unit has
operated in.
Unit Info
On new system installations displays the model
number and serial number of the selected unit.
If a control has been replaced the equipment will
be recognized but will only show the unit model
number.
Setup
Used to display or modify equipment settings
Dipswitches
Displays current setting of dipswitches on
equipment.
7.4- THERMOSTAT USER MENU
Tableau 2: Status User Menu
Status
Parameter
Indications
Comments
Configuration
HP - Heat Pump
DF - Dual Fuel
GH - Gas Heat
ES - Electric System
AC - Air Conditioner
FN - Fan
EH - Electric Heat
-- - Furnace and
Air Conditioner
Indication in center of screen shows the configuration
of the thermostat based on the equipment
connected.
The type of system with the number of stages will be
displayed above the
or
. Additional system
types and stages can be viewed by pressing
or