QTD2
Series
44
5.0
Maintenance
•
Kit Contents Check List
B
= Packed with Burner Control Box
T
= Packed with Emitter Assembly & Reflectors
Approvals
• CSA.
• Indoor/outdoor approval.
• Commercial approval.
Limited Warranty
• 1 year - Burner box components.
• 3 years - Radiant tubes.
• 5 years - Combustion burner.
• See page 43 for terms and conditions.
TP-33B
1/2” Shut-
Off Valve (Ball Valve
& Inlet Tap)
TP-83
24” Stainless
Steel Flexible
Gas Connector
THCS:
60” Chain
w/ S-Hooks
TP-6076A:
Vent
Adapter & Screws (3)
TR-EB:
3/8” - 16
Eyelet Bolt
LIOQTD2:
QTD2 Series
Installation,
Operation
and Parts
Manual
WARNING
!
Improper installation, adjustment, alteration, service or maintenance can cause property damage,
injury or death. Read the installation, operation and maintenance instructions thoroughly before
installing or servicing this equipment.
This heater
must
be installed and serviced by trained gas installation and service personnel only.
Failure to comply could result in personal injury, asphyxiation, death, fire or property damage.
Do not
store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
In locations used for the storage of combustible materials, signs
must
be posted to specify the
maximum permissible stacking height to maintain the required clearances from the heater to the
combustibles. Signs must either be posted adjacent to the heater thermostats or in the absence of
such thermostats, in a conspicuous location.
Not for residential use!
Do not use this heater in the home, sleeping quarters, attached garages,
etc. Installation of a commercial tube heater system in residential indoor spaces may result in
property damage, serious injury, asphyxiation or death.
QTD2 Series
Installation Manual
The QTD2 Series Infrared Tube Heater is a negative pressure, single-stage radiant heater
system. This manual provides specific information related to the QTD2 Series model. All persons
involved with the installation, operation, and maintenance of the heater system must read and
understand the information in this manual.
For Your Safety
If you smell gas:
• Open windows.
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Immediately call your gas supplier from a neighbor’s phone.
• Extinguish any open flame.
• Follow the gas supplier’s instructions.
• Do not use any phone in your building.
• If you cannot reach your gas supplier, call the fire department.
LIOQTD2 - Rev. 04216
Print: 1M-02/16 (CDS)
INSTALLER: Present this manual to the end user.
Keep these instructions in a clean and dry place for future reference.
Model#:
___________________
Serial #:
__________________________
(located on rating label)
Box
Part No.
Description
Quantity
B
LIOQTD2
QTD2 Series Installation, Operation, and Parts Manual
1
T
THCS
Bulldog #1 12-Ga. 60” Chain with S-Hooks
3
B
TP-13
Self Drilling Screws for Vent Pipe (Not Pictured)
3
B
TP-33B
1/2” Shut-Off Valve (Ball Valve & Inlet Tap)
1
T
TP-62
#8 x 1/2” Screw for Reflectors (Not Pictured)
16
B
TP-83
24” Flexible Connector
1
B
TP-6021B
Tube Flange Gasket
2
B, T
TP-6022
5/16” - 18 Keps Nut
9, 4
B
TP-6076A
Vent Adapter
1
T
TP-6084A
U-End Reflector End Cap
2
T
TP-6085A
Burner Reflector End Cap
2
T
TP-6086A
#8 x 1/2” Red Shoulder Screw (Not Pictured)
4
B
TR-EB
3/8” - 16 Eyelet Bolt
1
Filled By:
QTD2 Series Kit Contents
TP-6022:
5/16”-18
Keps Nut
TP-6021B:
Tube Flange Gasket
TP-6085A:
Burner
Reflector End Cap
TP-6084A:
U-End
Reflector End Cap
Kit Contents Check List
© 2017 Detroit Radiant Products Co.
21400 Hoover Road • Warren, MI 48089
Phone: (586) 756-0950 Fax: (586) 756-2626
www.detroitradiant.com • [email protected]
Printed in U. S. A.