Page
14
of
17
FILLER PLATE
Filler plates are held in place between the pushpad and the end cap; no screws or hooks
are needed to hold the filler plates in place. Like the pushpad, filler plates have a variety of
lengths and configurations depending on the application of the device.
DTX #
LENGTH
CONFIGURATION
24”
100711-X
30”
LD, CD, HD, EA, EI, ES, EB-W, ED, ER, EA-
EX, EX-ES, EX, EX-W, EXV, EXV-W, LX-ES, EX-
LX-ES, ER-EX-W, ER-EXV-W
3
6”
4
8”
EXTRUSION & WRAP
Extrusions and wraps come in a variety of lengths and finishes. The standard lengths are
the same as for the pushpad and filler plate. However, custom lengths are available depending
on the width of the door where the device is installed. The extrusion and wrap hold the body of
the device without screws; the wrap just slides into the extrusion.
END CAPS
DTX #
LENGTH
24”
101381-X
30”
36”
48”
DTX # 100711-X CD SHOWN