DETEWE OpenPhone 24, User Manual

Page: 59 / 80

55
F
Press the arrow key centrally. You will receive the pos confirmation.
E
Press , the programming is complete.
Note
When programming a destination key, it may be necessary to enter a dialling pause in between indi-
vidual digits (e.g. in order to guarantee correct connection creation for some foreign call numbers).
In addition, it may be necessary to save a so-called suffix dialling signal at the end of the call number
(e.g. 12345-0). When the number is dialled, dialling will pause when the suffix is reached (in this
case, before 0) This gives you the opportunity to dial the required extension. If you do not enter any-
thing, then dialling is continued (after a pause) with the numbers after the suffix (in this case 0). This
normally is the central exchange.
When entering the digits to be dialled by a destination key, the suffix dialling code or pause code
can be entered in the following manner:
r
Press the R key
3
Press the digit 3
1
Digit 1 for pause
or
2
Digit 2 for suffix dialling
Calling with Destination Keys
*
Long press star/transfer key
t
Press the key to be programmed from 2 ... 9. The call number will be dialled.
Menu
The Service Menu