47
Features and Menus – Local Handset
Overall Menu – Handset
“System” Menu
Your handset can be operated on
up to ten other DECT systems.
Before you can use the DECT system
to telephone, you must first enrol
the handset on the selected system.
For enrolment you possibly require
a system ID and an access code. Ask
the System Administrator responsi-
ble for the code if necessary.
For
New
Enrolment you must com-
plete the following entries:
•
PARK:
You only need to specify
a PARK if your handset is to be
operated on a specific DECT sys-
tem (e.g. at locations where the
radio coverage areas of two
DECT systems overlap). Press
OK
to skip this setting if it does
not apply.
•
Enter PIN:
This code enrols your
handset.
•
Enter Name:
Enter a name for
the DECT system on which you
are enrolled. This name will
always appear in your display in
the idle state. Please refer to
“Text Input” on p. 15.
•
Enter Number:
Some DECT sys-
tems transmit your reserved
telephone number. If this is not
the case, you can enter it here
(your System Administrator will
tell you the telephone number).
•
Select:
If you have enrolled your
handset on more than one
DECT system, you can select
which one your handset is to
use here. Use the arrow keys to
select the system before press-
ing
Select
.
•
Automatic Search:
If you have
enrolled your handset on more
than one DECT system, your
handset will automatically
select one of the available DECT
systems as long as it is switched
on. As soon as you leave the
range of the current DECT sys-
tem, your handset is automati-
cally checked in to another
DECT system.
•
Subscriptions - Delete:
Here you
can delete the enrolment on a
DECT system from your hand-
set. The handset can only be
operated in this system again
after a new enrolment. Use the
arrow keys to highlight the
DECT system before pressing
Delete
.
