29
Transferring an External
Call to an External Sub-
scriber
The transfer of an external call to an
external subscriber is possible only
via the
Subscriber
menu.
Press the
Menu
softkey briefly and
confirm with
OK
.
According to the settings of your
telecommunications system, the
external calls will be connected in
your PBX.
Note:
If you connect two directly
dialled calls, the charges are billed
to your account. You have no con-
trol over the duration of the trans-
ferred call.
“Subscriber held” Menu
You have put a call on hold and are
now making an enquiry call. Press
the
Menu
softkey briefly and select
...
Disconnect
: You disconnect the cur-
rent call and restore the dialling
mode.
Telephoning
Consultation, Toggle, Transfer and Conference
Connect*:
You connect the held
subscriber with the subscriber to
whom you are currently connected.
Conference*:
You initiate a 3-party
conference.
Toggle:
You toggle between the
current and the previous subscriber
to whom you spoke.
Door opener*
: You activate the door
opener.
Internal/External 3-Party
Conference
You have made an internal or exter-
nal consultation call.
If the subscriber accepts the call,
you announce the conference and
select the item
Conference
from the
Subscriber held
menu. The confer-
ence is initiated.
Press
G
to end the conference.
Note:
Connecting the two confer-
ence participants or disconnecting
them singly is possible only via the
corresponding menu item.
If you want to speak to one of the
participants in the conference
alone, or disconnect them singly,
you select the
Conference
menu.
You can then speak to this sub-
scriber, while the other one is held.
* This menu item is only available if the appropri-
ate user access rights have been configured in
the Configurator.