17
Display of Operation
In the following you will find listed,
below the display, all the softkey
functions of the left and right keys
you are able to activate by pressing
the arrow keys or softkey
OK
.
Switching the Handset
On/Off
You can switch the handset off by
pressing
G
for approx. two sec-
onds in the idle state. You switch it
on by pressing
G
again or by plac-
ing the handset in the charger.
Keypad Lock On/Off
You can lock the keypad to prevent
accidental activation: press
c
for
approx. two seconds.
To unlock the keypad (as shown in
the display), first press
¡
and then
‘
.
When the keypad is locked you can
still accept calls. During the call you
can use all keys. When the call has
been completed, the keypad lock
becomes active again.
Telephoning
General
Adjusting the Loud-
speaker Volume
During a call you can use the arrow
keys to adjust the loudspeaker vol-
ume to any one of six levels. The
current volume level is shown by a
symbol in the middle of the bottom
display line.
Muting
When the Mute softkey is shown on
the display during a call, you can
use it to deactivate the handset
microphone.
Optical Call Indicator
The LED ring around the loudspeak-
er flashes to indicate an incoming
call.
Telephoning
General