8525-0358-0M Rev-B
•
DR400C/DR550C Operation
4
DISPLAY ANNUNCIATORS
The display annunciators are turned on to indicate that the scale display is in the mode
corresponding to the annunciator label or that the status indicated by the label is active.
O
This annunciator will be turned on when the weight display is stable.
This annunciator will be turned on when a negative (minus) weight is displayed.
This annunciator will be turned on when the scale weight has been zeroed.
Hold
This annunciator will be turned on after pressing the
HOLD
key.
NET
This annunciator will be on after pressing
TARE
key to tare weight of item on scale.
kg
This annunciator will be turned on to indicate that the displayed weight is in kilograms.
lb
This annunciator will be turned on to indicate that the displayed weight is in pounds.
Lo
(Low Battery)
When the batteries are near the point they need to be replaced, a low battery indicator on the
display will turn on. If the voltage drops too low for accurate weighing, the scale will
automatically shut off and you will be unable to turn it back on. When the low battery indicator
is displayed, the operator should replace the batteries or remove the batteries and plug the
power supply into the scale and then into the proper electrical wall outlet.
