8525-0358-0M Rev-B
•
DR400C/DR550C Operation
5
OPERATION
DO NOT operate the keypad with pointed objects (pencils, pens, etc.).
Damage to keypad resulting from this practice is NOT covered under warranty.
Turn the Scale On
Press the
ON / OFF
key to turn the scale on. The scale display will show all segments then
change to the selected weighing units.
Select the Weighing Unit
Press the
lb/kg
key to alternate between the selected weighing units.
NOTE:
Multiple
weighing units must be enabled during configuration for this function to be operational.
Weighing an Item
Place the item to be weighed on the scale platform. Wait a moment for the scale display to
stabilize, then read the weight.
To Zero / Tare the Weight Display
To zero the weight display or to tare weight of item (e.g. box or crate) on the scale, press
the
TARE
key. If nothing is on the scale when pressed the scale will zero. If an item is on
the scale when pressed, the scale enters tare mode and the NET annunciator is turned on.
This is useful when weighing in merchandise to be weighed in a container. To control the
total weight, the value of the container may be retrieved. This way it is possible to control to
what extent the loading area of the scale is utilized. (Gross, i.e. incl. weight of container).
Hold Weight Display
To hold the weight display, press the
HOLD
key.
The indicator will display
H_
on and flash
HOLD annunciator. Place animal on scale. When weight stabilizes, the indicator will
display and hold the weight and the HOLD annunciator will be steady. Press HOLD or
TARE to exit Hold mode.
Turn the Scale Off
With the scale turned on, press the
ON / OFF
key to turn the scale off.