5
95-8676
3.1
CERTIFICATION—
For complete approval details, refer to the appropriate
Appendix:
Appendix A - CSA
Appendix B - ATEX/CE
Appendix C - IECEx
Appendix D - INMETRO
DIMENSIONS—
See Figure 2.
SHIPPING WEIGHT (Approximate)—
11.5 pounds (5.2 kg).
WARRANTY—
Five year limited warranty from date of manufacture.
See Appendix G for details.
IMPORTANT SAFETY NOTES
CAUTION
The wiring procedures in this manual are intended
to ensure proper functioning of the device under
normal conditions. However, because of the
many variations in wiring codes and regulations,
total compliance to these ordinances cannot be
guaranteed. Be certain that all wiring complies
with the NEC as well as all local ordinances. If
in doubt, consult the authority having jurisdiction
before wiring the system. Installation must be
done by a properly trained person.
CAUTION
This product has been tested and approved
for use in hazardous areas. However, it must
be properly installed and used only under the
conditions specified within this manual and
the specific approval certificates. Any device
modification, improper installation, or use in a faulty
or incomplete configuration will render warranty
and product certifications invalid.
CAUTION
The detector contains no user serviceable
components. Service or repair should never be
attempted by the user. Device repair should be
performed only by the manufacturer or trained
service personnel.
LIABILITIES
The manufacturer’s warranty for this product is
void, and all liability for proper function of the
detector is irrevocably transferred to the owner or
operator in the event that the device is serviced or
repaired by personnel not employed or authorized
by Detector Electronics Corporation, or if the
device is used in a manner not conforming to its
intended use.
CAUTION
Observe precautions for handling electrostatic
sensitive devices.
NOTE
The PointWatch Eclipse CO
2
model is intended for
detection of carbon dioxide only. The device will
not detect hydrogen or hydrocarbon gases.
4.5
(11.4)
5.2
(13.2)
9.3
(23.6)
4.6
(11.7)
D2055
3/16” (4.8mm) BARB FITTING
(STANDARD WEATHER BAFFLE)
Figure 2—Dimensions of Eclipse Detector in Inches (Centimeters)
®
