FREEDOM DC-60 v2.4 (04/2021)
Page 16
3) Stopping the watermaker: without rinsing of the membranes
It is not necessary to rinse your membranes if you use your watermaker regularly.
Set the switch to OFF, the watermaker will stop. You can now lower the pressure regulator
knob (towards the left, the initial position).
Beyond 10 days without use,
it is best to rinse the membranes before the watermaker is
started-up again (see manual rinse procedure in
Appendix A3
).
4) Stopping the watermaker: with automatic rinsing of the membranes
A rinsing must be carried out if the watermaker is not going to be used for more than
10 days.
After using the watermaker,
do not turn it off
. Start turning the knob of the pressure
regulator (counterclockwise) to engage the rinsing mechanism, the pressure of the
manometer will drop .
The watermaker will then start the rinsing procedure. The green and yellow LEDs on the
control panel will illuminate, indicating that the flushing procedure is started. The procedure
lasts 30 seconds. Once it is complete, the green and yellow LEDs will turn off and the only
remaining light will be the flashing blue LED on the switch . If you do not have a Mini
Remote Control, you can turn off the system by position the switch to OFF.
