ENGLISH
Lamp installations
1) Take off the wall bracket for lamp body from the lamp body.
(As shown in figure 8)
2) Choose the wall you want to set and signed with the 3 holes of Housing.
(As shown in figure 9)
3) Burrowed with Inflatable Screws on the 3 holes.
(As shown in figure 10)
4) Fix the wall bracket with provided 3Pcs PA4*35 Screws.
(As shown in figure 11)
5) Set the Lamp Body to the wall bracket.
(As shown in figure 12)
6) Adjust the angle of the lamp sensor (As shown in figure 13)
and “SENSOR LEVEL” & “DURATION”(As shown in figure 14)
according to your requirement.
Connection of the Solar Panel and Lamp
1) Insert the plug of the 5m Wires into the pole at the bottom of Lamp body.
2) Turn the button to the “OFF” position so that the batteries can be fully charged before use.
3) After 2days charge at first time, turn the button to “AUTO” position to assure the solar
light begin to work normally.
