• Using template dimensions(fig2),
mark and drill 4 holes at the ceiling to
hang the Cooker hood (1). Insert the
wall plugs (6).
• Disassemble the glass set from the
ceiling plate (fig. 3).
• Fix the ceiling plate with the screw
(5) in the plugs (fig. 4).
• Connect the Main supply to the
Terminal Block (fig. 5).
• Assemble the glass set to the ceiling
plate (fig. 6)
• Measure the steel cables length
keeping them tight and fix the holding
brackets at the correct height (fig.7).
• Use the packaging box to situate
the Cooker Hood (1) on the top of the
cooking surface (fig 8-9).
• Fix the holding brackets to the hood
and take out the packaging box (fig. 10-
11).
• Check the hood levelling (fig. 12).
• Disassemble the glass set from the
ceiling plate, to level the hood using the
mechanism (fig. 13-14).
• Disassemble the wiring protection
from the glass set. Pass the hood supply
cord through the hole, and connect to
the Terminal Block in the ceiling plate
(fig.15-16).
• Assemble the glass set to the ceiling
plate, and assemble the wiring
protection (fig. 17).
• Remove the protective film (fig. 18)
