TABLE OF CONTENTS
1. Introduction
3
2. Safety precaution
3-4
3. Intended use
5
4. Parts supplied
6
5. Installation
7-11
6. Operation
12
7. Maintenance
13
8. Troubleshooting
14
9. Technical data
14
10. Environmental protection 14
1. INTRODUCTION
Thank you for choosing this cooker
hood.
This installation and user’s manual is
designed to provide you with all
required instructions related to the
installation, use and maintenance of the
appliance. In order to operate the
appliance correctly and safety, please
read this installation and user ’s manual
carefully before installation and usage.
Keep this installation and user’s manual
for future use. Should this appliance be
passed on to a third party, then this
installation and user’s manual must be
included.
No liability will be accepted for damage
resulting from improper use or non-
compliance with these instructions.
2. SAFETY PRECAUTION
.Important! Always switch off
the electricity supply at the
mains during installation and
maintenance such as for light
bulb replacement
General
The cooker hood is suitable for
domestic use only.
Children
• Please dispose if the packaging
material carefully.
Packaging material can be dangerous to
children.
Danger of suffocation!
• Children should be supervised to
ensure that they do not play with the
appliance.
Installation
• The cooker hood must be installed in
accordance with the installation
instructions and all measurements must
be followed.
• All installation work must be carried
out by a competent person or qualified
electrician.
• When installing the cooker hood,
make sure that the following
recommended distances between the top
of cooker and the lowest part of the
cooker hood are observed:
→
Gas
cookers:
65cm
→
Electric
cookers: 65cm
→
Coal or oil cookers: 80cm
• Do not install above a cooker with a
high level grill.
• Make sure the ducting has no bends
sharper than 90 degrees as this will
reduce the efficiency of the cooker
hood.
• Pay attention to the sharp edges
inside the cooker hood during
installation.
Electrical safety
• Regularly check the power cord for
damage. If the supply cord is damaged,
it must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
• The appliance must be placed in
such a way, that the power supply is
accessible at all times.
• Before connecting the appliance to
the power supply, check that the power
supply voltage and current rating
corresponds with the power supply
details shown on the appliance rating
label.
• Never use a damaged appliance!
Disconnect the appliance from the wall
outlet and contact your supplier if it is
damaged.
•
Danger of electric shock!
Do not
attempt to repair the appliance yourself.
In case of malfunction, repairs are to be
conducted by qualified personnel only.
